Logo
  • EN
  • 繁
  • Products
    • Hard Drive Enclosures
      • 2.5" Enclosures
      • 3.5" Enclosures
      • Hard Drive Docks
      • Optical Disk Enclosures
    • Hard Drive Accessories
      • Hard Drive Adapters
      • Converters
      • Mobile Racks
      • Mounting Brackets
    • Audio + Video
      • Adapters
      • Converters
      • Docking stations
      • Headphones
    • Mobile Accessories
      • Stabilizer
    • Add-on Cards
      • Add-on I/O
      • Firewire
      • Serial ATA
      • Sound
      • USB
      • Network
    • Accessories
      • Cables
      • Card Readers
      • Hubs
      • Mobile
      • Network
      • USB Charging
      • USB I/O
      • Computer Accessories
    • Cooling
      • Case Fans
      • HDD Cooler
      • Laptop Cooler
      • System Cooler
    • Industrial Products
      • Industrial Hubs
      • Industrial Add-on Cards
    • Nvidia Accessories
      • Cables Accessories
  • Support
    • FAQ
      • Frequently Asked Questions
      • Knowledge Base
    • Media Center
    • Download Center
    • Where To Buy
    • RMA Center
  • About Us
    • Who We Are
    • Sitemap
    • Contact
  •  Products   FAQ
Home / Products / Add-on Cards / Serial ATA / M.2 NVMe SSD PCIe x4 Adapter
  • M.2 NVMe SSD PCIe x4 Adapter

    UGT-M2PC100

    The M.2 NVMe SSD PCIe x4 Adapter offers the fastest boot or data access possible via the PCIe interface. It provides the link between PCIe 4 lanes of data path straight to the NVMe SSD resulting in super-fast data transfer. This adapter allows for flexible installation of an M.2 (NGFF) NVMe or PCIe AHCI SSD of different size like 42, 60, or 80mm in length with varying capacity. This M.2 adapter will give you the best performance possible for your system.      


     

    BUY NOW
    • fb
    • g+
    • tt


  • Highlight
  • Spec
  • Support
  • FAQ
  •  

     

    • Support M.2 (NGFF) PCIe based (NVMe or AHCI) SSD to PCIe x4 slot
    • Support M.2 interface with M key, do not support M+B key
    • Support different length M.2 (NGFF) card, 22x42mm, 22x60mm or 22x80mm
    • Adapter supports PCI Express v3.0 Specs and compatible with v2.0 / v1.0
    • Supports system boards  with PCIe x4,x8,x16 slots
    • Uses minimum power from PCIe 3.3V for better power management
    • Low Profile Bracket included
Model:     UGT-M2PC100
 
M.2 Type Support:     NVMe or AHCI SSD using M Key only
M.2 size:     Length support 22x42mm, 22x60mm or 22x80mm
Internal Interface:     1 x M.2 (NGFF), M Key
PCIe Interface:     PCIe v3.0 or PCIe v2.0 x4 (4 lanes)
Power:     PCIe Bus powered (3.3V)
Dimensions:     5.8 x 4.7 x 0.7 inches / 148 x 120 x 17 mm
Weight:     3 oz. / 85 g
 
 
System Requirements:
For booting, system requires UEFI BIOS with booting support 
Available system board PCIe x4 or x8 or x16 slot
OS support like Windows® 7/8/8.1/10 (Windows 10 preferred), or Linux (Latest Kernel) 
 
 
What's Included:  M.2 NVMe SSD PCIe x4 Adapter, Quick Installation Guide, Mount and Screws set, Low Profile Bracket

 

UPC:  844767022765

EAN:  4716872103188

Driver

Manual

How to add a PCIe card to your desktop or Slim PC? [#02032019]

  • When adding or removing the card (PCI or PCIe), please ground yourself so that you do not carry any static electricity.
    When you are working on a computer system, the design of the system power supply is always ON and that includes the motherboard and many of the component on the motherboard like the PCIe bus and USB ports. Unless you physically unplug the power cord from your wall outlet, these power supply will continue to power the motherboad and inserting the the addon card into a live slot may short the card and not function correctly.

    Here are the steps to correctly install an addon card:

    1.  The first step is to know what you need and get all the necessary component ready.

    2.  If your system chassis is a slim chassis design, your will need to replace the metal bracket with a low profile bracket.
    Follow the PCIe card quick installation guide on replace the standard bracket with a low profile bracket before you continue to the next step.

    3.  Shutdown your system and turn off the power. Important: Unplug the power cord that goes from the computer to the wall outlet or your power strip and wait for 1 whole minute for your system board to be fully discharge of any residue power.

    4.  Remove cover of the system to access the slot on the motherboard.

    5.  If your system have L bracket covering the slot. Get ready to remove one of them that align with the slot you are going to insert the add-on card.

    6.  Most motherboard have a few slots. They may be PCI or PCIe slot. If you are install a PCIe card, find a PCIe slot that is equal or bigger than your card.
    example: If you are installing a PCIe x1 card, it can be inserted into x1, x4, x8, x16 slot. But if you are installing a x4 card, it will have to go into a x4, x8, x16 slot.

    See example below.

     

    7.  Remove the L bracket align with the slot that you are going to inserted and insert the new add-on card into the slot.

    8.  Secure the card to the chassis using the instruction provided by the chassis manufacturer.

    9.  (Optional) If the add-on card requires additional connection for power like 4 pin molex or SATA power connector, get the connect from the power supply and connect to the card.

    10.  Replace the chassis cover and secure the screws holding the cover.

    11.  Connect back the power cord and turn the power back ON for the system.

    12.  Follow the instruction from the add-on card install guide to continue the installation process.

     

     

Windows 7 Driver and Error code 28 with UGT-M2PC200, UGT-M2PC100, UGT-M2PC110 on Windows 7 or Windows Server 2008 R2 OS [#33428]

  • For Windows 7 and Windows Server 2008 R2:

    If you are getting missing drivers (code 28) when you add this card, please us the hotfix from microsoft to correct and update the drivers.

    https://support.microsoft.com/en-us/help/2990941/update-to-add-native-driver-support-in-nvm-express-in-windows-7-and-wi

     

    You can also access the drivers directly here.

    Windows 7, 64bit, Location: (https://www.vantecusa.com//CKEdit/images/files/477475_intl_x64_zip.exe)

    Windows 7, 32bit, Location: (https://www.vantecusa.com//CKEdit/images/files/477474_intl_i386_zip.exe)

     

     

I have an M.2 NVMe SSD from a computer and I need to retrieve the data. How do I do it with your UGT-M2PC200 or UGT-M2PC100 or UGT-M2PC110? [#33430]

  • Mount the NVMe SSD on the UGT-M2PC200 or UGT-M2PC100 or UGT-M2PC110 NVMe slot, insert this PCIe x4 card into your system PCIe x4 or better slot. If you are using Windows 7 OS, you need to download drivers from Microsoft to patch your Windows 7 OS so that the system can read the NVMe SSD correctly. If you are using Windows 10, it should automatically see the card and the NVMe SSD.

     

    Here is the link to access the patch from Microsoft:

    http://hotfixv4.microsoft.com/Windows%207/Windows%20Server2008%20R2%20SP1/sp2/Fix487764/7600/free/477475_intl_x64_zip.exe

     

     

LED status for UGT-M2PC100 or UGT-M2PC110 [#07082019]

  • The LEDs on the card show the power and activity of the NVMe and UGT-M2PC100 / UGT-M2PC110 card.

    When the card is getting power from the PCIe Bus, the Red LED2 will always be ON. If this Red LED2 is not ON, please check and reseat the card, follow the steps outline in the Knowledge Base here.

    https://www.vantecusa.com/faq.php?fc_id=5

    When the card is getting power (Red LED2 is ON) and the Blue LED1 is not Random flashing (activity), during boot or use, please check the NVMe module and make sure the NVMe module is seated all the way into the M.2 interface. Check for short and proper mounting of the NVMe module on to the card.

    LEDs status 

     

  • Follow us for all the latest news, tips and updates.

    • Shop Vantec
    • Privacy Policy
    • Term of Use
    • Contact
  • © 2017 Vantec Thermal Technologies.
Top