VLink USB 3.0 To 2.5G Ethernet Adapter with USB HUB A port

Home / Products / Accessories / Network / VLink USB 3.0 To 2.5G Ethernet Adapter with USB HUB A port

VLink USB 3.0 To 2.5G Ethernet Adapter with USB HUB A port
CB-U325GNA
- Support 10M/100M/1000M/2500Mbps (2.5G) Ethernet
- Support Full Duplex with IEEE 802.3x Flow Control & Half Duplex with back-pressure flow control
- Compatible with NBASE-T Alliance PHY, IEEE 802.3bz (2.5GBASE-T)
- Support Up to 16KB Jumbo Frames (Windows OS); Auto-Negotiation
BUY NOW
- fb
- g+
- tt

Highlight
Spec
Support

The VLink USB 3.0 To 2.5G Ethernet Adapter with USB HUB A port enables you to add a 2.5 Gigabit Ethernet port using an existing USB Type-A input on your computer or desktop and provides an RJ-45 connector that supports 10/100/1000/2500Mbps Ethernet performance when wireless connectivity is unreliable or inconsistent. When we design this adapter and know this adapter is going to take up one of your precious USB ports, we make sure this adapter comes with an additional USB Type-A port to use with other devices so that you do not lose a port. You can also connect to a USB-C port using an A to C converter (optional). Perfect for laptops with common USB Type-A ports such as the latest Windows 10, OS X, and Linux 3.x or Later.

Chipset Capability:
- Support 10M/100M/1000M/2500Mbps (2.5G) Ethernet
- Support Full Duplex with IEEE 802.3x Flow Control & Half Duplex with back-pressure flow control
- Compatible with NBASE-T Alliance PHY, IEEE 802.3bz (2.5GBASE-T)
- Support Up to 16KB Jumbo Frames (Windows OS); Auto-Negotiation
- Wake-On-LAN Technology
- Supports 2.5G Lite (1G data rate) mode
- Supports pair swap/polarity/skew correction
- Crossover Detection & Auto-Correction
- Supports CDC-ECM and CDC-NCM
- Supports LPM, U1/U2/U3 at USB 3
- Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
- Supports IEEE 802.1P Layer 2 Priority Encoding
- Supports IEEE 802.1Q VLAN tagging
- Supports IEEE 802.3az (Energy Efficient Ethernet)
- Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP)
- Supports Protocol Offload (ARP & NS)
- Microsoft AOAC (Always On Always Connected)/Modern Standby
- Supports 32-set 128-byte Wake-Up Frame pattern exact matching
- Supports link change wake up
- Supports Microsoft WPD (Wake Packet Detection)